manualshive.com logo in svg

WAGO 750 Series, Manual

The Arista 750 Series is a cutting-edge networking solution that offers outstanding performance and efficiency. To quickly get started with this remarkable device, simply visit manualshive.com to download the free Quick Start Manual. Our comprehensive manual provides everything you need to maximize your experience with the Arista 750 Series.

Share
Download
background image

122

  

•

    Step-by-Step Guide to your own Linux Application 

 

 

 

Debugging of User Space Programs 

 

 

 WAGO-I/O-SYSTEM 

750 

Linux Fieldbus Coupler 

To simplify the operation of GDB, a script needs to be generated that creates 
defined starting conditions for the debugger. Use the following call to generate 
the script: 

> emacs gdb.script 

Enter the following code into the emacs and save it via CTRL-X, CTRL-S: 

 

 

If the default IP address of the Linux fieldbus controller has been changed, it 
is necessary to also change the IP address that is in the first line of the above-
mentioned script.   

In the first line of the script, a remote connection is automatically established 
to the GDB server of the Linux fieldbus controller with the IP address 

192.168.1.3

 using port number 

1234

. The second line sets a breakpoint to 

the 

main

 routine and the third line starts the program that runs until the 

breakpoint is reached. 

 

5.12.5  Debugging via the GDB Console 

In order to enable cross debugging between the PC and the Linux fieldbus 
controller, a connection via Ethernet is used. In the procedure described below 
the Linux fieldbus controller has the default IP address 192.168.1.3, the Linux 
PC has IP address 192.168.1.4. If your settings differ from the settings 
indicated above, change the IP addresses so that they match the addresses in 
the example. 

First, start the GDB server on the Linux fieldbus controller. To do so, change 
the directory in which is the program that has been created in the previous 
section:  

> cd ~/uclinux-dist/user/newProg 

Enter the following call into the console:

 

> gdbserver 192.168.1.4:1234 newProg 

target remote 192.168.1.3:1234  

b main  
continue 

Summary of Contents for 750 Series

























































































































































































































































Reviews:

No comments

Related manuals for 750 Series

Eaton CF2000 Installation And Operation Manual preview
CF2000
Brand: Eaton Pages: 100
Salda FLEX Service Manual preview
FLEX
Brand: Salda Pages: 20
jablotron RC-40 Manual preview
RC-40
Brand: jablotron Pages: 2
OBSIDIAN CONTROL SYSTEMS NX1 Installation Manual preview
NX1
Brand: OBSIDIAN CONTROL SYSTEMS Pages: 13
Paradox Magellan REM2 Reference And Installation preview
Magellan REM2
Brand: Paradox Pages: 2
tau K125M Installation Manuals preview
K125M
Brand: tau Pages: 9
tau K100M Translation Of Original Instructions preview
K100M
Brand: tau Pages: 8
Polycom VVX Series Basic Troubleshooting preview
VVX Series
Brand: Polycom Pages: 2
Tech 21 MIDI MONGOOSE Owner'S Manual preview
MIDI MONGOOSE
Brand: Tech 21 Pages: 2
Daikin RoCon BF Operating Instructions Manual preview
RoCon BF
Brand: Daikin Pages: 64
Qcells Q.PEAK DUO BLK ML-G10/t Series Installation And Operation Manual preview
Q.PEAK DUO BLK ML-G10/t Series
Brand: Qcells Pages: 13
Fantini Cosmi CT3MA Instruction Manual preview
CT3MA
Brand: Fantini Cosmi Pages: 25
Invertek Optidrive Elevator Quick Start Up Manual preview
Optidrive Elevator
Brand: Invertek Pages: 5
Techtrol TLIC Instruction And Programming Manual preview
TLIC
Brand: Techtrol Pages: 4
Cypress CY3280-BK1 Quick Start Manual preview
CY3280-BK1
Brand: Cypress Pages: 3
INSBUD IB-TRON 4000 SOL Instruction Manual preview
IB-TRON 4000 SOL
Brand: INSBUD Pages: 14
SMC Networks EX250-SPR1 Operation Manual preview
EX250-SPR1
Brand: SMC Networks Pages: 31
Azbil ACTIVAL VY51 5H006 Specifications & Instructions preview
ACTIVAL VY51 5H006
Brand: Azbil Pages: 20

Brands by name

Popular brands

Load more brands