TITANUS
SUPER·SENS
®
Pipe
Design
TSS_04_A-en-e
Data: 02/09
4 –
5
TITANUS
TITANUS
TITANUS
U-pipe system
Double-U-pipe system
I-pipe system
®
®
®
TITANUS
®
M-pipe system
Fig. 4.2: Pipe designs
Direction
change
Angles and bends in the pipe system increase flow resistance. For that
reason, it is necessary to limit the number of them to the amount re-
quired.
It is preferable to use bends, since angles have a higher flow resistance.
Angles should therefore only be used where they are necessary due to
structural constraints.
Corresponds to a straight pipe length of
Angle
1.5 m
Bend
0.3 m
If the pipe system includes angles or bends, the maximum overall length
of the pipe system will be reduced.
Bends are to be preferred over angles.
An excessive number of changes in direction can change the detection
time.
INSTRUCTION