WAGNER GA 2000EAC, Translation Of The Original Operating Manual

Page: 37 / 56

37
GA 2000EAC, GA 2005EAC
$
8
5
9
"?
OPERATING MANUAL
EDITION 12/ 2008 PART NO. 350741
8.3
EXCHANGE OF COMPLETE VALVE ROD
1. Closing down and cleaning
2. Unscrew tension nut (X), and remove compression spring (U).
3. Unscrew locking piece (Y) using spanner, size 17.
4. Remove sealing screw (4) using spanner, size 6, from the paint seal housing (9).
5. Carefully pull out complete valve rod using surface (D) – replace if necessary.
6. Reassemble in reverse order – do not forget to screw in the centre packing screw (4).
Put locking nut (X) and compression spring in place and tighten by hand.
CAUTION
Unsuitable tool!
Damage to seals and sealing surfaces
œ
Do not hold the valve rod with pliers or a similar tool.
SIHI_0006_GB
#!54)/.
,EAKINGSPRAYGUN
2ISKOFINJURYFROMCOATINGMATERIALCOMINGOUT
œ $ONOTREMOVETHEPAINTSEALINGSLEEVE
3)()??'"