manualshive.com logo in svg

WAGNER GA 2000EAC, Translation Of The Original Operating Manual, Page: 30 / 56

Share
Download
WAGNER GA 2000EAC Translation Of The Original Operating Manual Download Page 30

30

GA 2000EAC, GA 2005EAC 

#

%

&

$

&

'

+

8

(

)

"?

OPERATING MANUAL

EDITION 12/ 2008

PART NO. 350741

5.4.5 

CHANGING FROM AIRCOAT ROUND JET TO AIRCOAT FLAT JET

1.   Replace paint with cleaning solvent, 

actuate trigger, and thoroughly rinse 
paint channel.

2.   Relieve spray gun and unit pressure.
3.   Secure spray gun! (remove control air 

hose)

4.   Unscrew nozzle nut (C).
5.   Remove seal nipple (E) and nozzle 

body (D) with universal spanner from 
adapter (F) 

6.   Screw seal ring together O-ring (G) to 

adapter (F) and tighten seal ring by 
hand.

7.   Fit Brillant-fl at jet nozzle (K) on paint 

channel in the adapter (F).

8.   Fit air cap (H) onto Brillant-fl at jet 

nozzle (K). 

 Attention:

 

Make sure that the pins in the air cap fi t 
into the grooves in the fl at nozzle.

9.   Fit cap ring (I) with air cap (H) onto 

spray gun body (F).

10.   Adjust desired jet level by means of air 

cap horns (X) and tighten cap ring (I) 
by hand.

Universal spanner

Summary of Contents for GA 2000EAC

























































Reviews:

No comments