96
OPERATING MANUAL
VERSION 05/2017
ORDER NUMBER DOC 2357061
CAN I/O modules alarm messages
Alarm No. Alarm message in the display
Meaning
A500
Initialisation error
Internal error when starting up the touch panel.
A501
CAN master error
The touch panel CAN master process not possible.
A502
CAN master alone
The touch panel CAN master found no connected
slaves on the CAN bus.
A503
SDO sending error
Error while sending or receiving SDO telegrams.
A504
SDO receiving error
A505
Saving interrupted
Error while saving on the PC.
A600
Module D2 no communication
No communication to the corresponding module.
A601
Module D3 no communication
A602
Module D4 no communication
A603
Module D5 no communication
A604
Gateway D6 no communication
A606
Module D2 CAN emergency
Module sends an emergency telegram.
A607
Module D3 CAN emergency
A608
Module D4 CAN emergency
A609
Module D5 CAN emergency
A610
Gateway D6 CAN emergency
A612
Module D2 CAN error
Slave reports communication problems.
A613
Module D3 CAN error
A614
Module D4 CAN error
A615
Module D5 CAN error
Acknowledge alarm
: By means of the STOP push button or on the screen with the [Reset]
button.
Fault rectification:
see Chapter
