manualshive.com logo in svg

WAGNER 2K COMFORT, Original Operating Manual, Page: 104 / 128

Share
Download
WAGNER 2K COMFORT Original Operating Manual Download Page 104

104

OPERATING MANUAL

VERSION 05/2017

ORDER NUMBER DOC 2357061

A503

SDO sending error

A504

SDO receiving error

Error while sending or receiving SDO telegrams.

− Switch off the system and back on via the main switch.
− Contact the Service Team.

A505

Saving interrupted

An error occured while saving on the PC.

− Check the archiving software on the PC.

A600/A601/A602/A603

Module 

D2/D3/D4/D5

 no communication

A604

Gateway D6 no communication

Slave is not responding.

− Check corresponding module: voltage supply, CAN cable, address, baud rate and 

terminating resistor.

− Switch off the system and back on via the main switch.
− Contact the Service Team.

A606/A607/A608/A609

Module 

D2/D3/D4/D5

 CAN emergency

A610

Gateway D6 CAN emergency

Corresponding module sends an emergency telegram.

− Switch off the system and back on via the main switch.
− Contact the Service Team.

A612/A613/A614/A615

Module 

D2/D3/D4/D5

 CAN error

Corresponding slave reports communication problems.

− Switch off the system and back on via the main switch.
− Contact the Service Team.

A616/A617/A618/A619

Module 

D2/D3/D4/D5

 hardware error EEPROM

A620/A621/A622/A623

Module 

D2/D3/D4/D5

 hardware error ADC

A624/A625/A626/A627

Module 

D2/D3/D4/D5

 hardware error TIMER

A628/A629/A630/A631

Module 

D2/D3/D4/D5

 unknown hardware error

A632/A633/A634/A635

Module 

D2/D3/D4/D5

 hardware error counter

Corresponding module reports a hardware error.

− Switch off the system and back on via the main switch.
− Contact the Service Team.

A640–A655

Module 

D2/D3/D4/D5

 DO group 

1/2/3/4

I/O module reports insufficient voltage supply at the respective output group. 

(DO = Digital Output)

− Check the voltage supply of the respective output group.
− Check the fuse of the respective output group.

See spare parts catalog, "I/O modules" chapter.

Summary of Contents for 2K COMFORT

































































































































Reviews:

No comments