WAFER GSM-HOUSE INTERCOM UNIT
http://www.waferstar.com
ADVANTAGES OF WAFER GSM-HOUSE
ˇ
Wireless intercom with one push button.
ˇ
2 phone number can be assigned to the push button for intercom voice calling.
ˇ
Wide power voltage input from DC9V to DC18V
ˇ
Gate control function by authorized WHL numbers
ˇ
200 Number memory can be authorised.
ˇ
The output can be activated by pushing the unit’s call button.
ˇ
No call charges to operate when phone calling to control.
ˇ
Open gates prior to arriving.
ˇ
Let visitors and deliveries in remotely.
ˇ
Impossible to clone or intercept.
ˇ
Caller ID confirmation for security.
ˇ
Quick & easy number barring.
ˇ
Can be operated from anywhere.
ˇ
Easy programming in minutes with your phone or PC software
ˇ
Remote configuration by SMS message.
ˇ
Recharageable backup battery for power off alarm and working.
INSTALLATION
To install the GSM-HOUSE, you need to connect the 2 wires of the relay contact in parallel
with the gate opening button. The relay contacts can stand
30V 2A maximum
, this is enough for
its operation but
don't try to switch higher voltages or currents
. You should install the
GSM-HOUSE in a place where there is GSM signal coming from the operator you want to use.
Check it with a phone before proceeding with the installation. If you need to install the device in a
place with little signal, you may consider using the magnetic mount better gain GSM antenna that
we may supply as an option to be purchased separately with 200cm cable.
You should then insert the SIM Card of the operator you want to use with the right direction
according to the following pictures.
!Note! : You must remove the PIN request from the SIM before inserting it in the
unit
, otherwise the device will not work. In order to do so, insert the SIM in a mobile phone and
Please read this entire manual before installation
!Note!
z
Take EXTREME care with the DC voltage polarity Power line installation
z
In case of fault power connection will cause the default permanently.
z
If device is connect into electricity, you couldn’t take off its cover.
z
To maximise reception, install the GSM antenna in a prominent elevated position if
possible, and vertically mounted.
z
The GSM unit requires mounting carefully with the lock for proper operation.
z
Always ensure that the power is switched OFF before inserting or removing a SIM
card from its holder or damage will be caused to the module.
