WAFER GSM-HOUSE INTERCOM UNIT
http://www.waferstar.com
Check the Customized command text:
#PWD123456#OUT1-TEXT?
Reply:
OPEN1-TEXT=OPEN1,CLOSE1-TEXT=CLOSE1,TRIG1-TEXT=DIAN1
#PWD123456#OUT2-TEXT?
Reply:
OPEN2-TEXT=OPEN2,CLOSE2-TEXT=CLOSE2,TRIG2-TEXT=DIAN2
For example,you send the command:
#PWD123456#OPEN1-TEXT#GATE1 OPEN
Reply:
OPEN TEXT1 IS GATE1 OPEN
Then you can use the simple SMS: GATE1 OPEN to switch on the output1 relay
#PWD123456#CLOSE1-TEXT#GATE1 CLOSE
Reply:
CLOSE TEXT1 IS GATE1 CLOSE
Then you can use the simple SMS: GATE1 CLOSE to switch off the output1 relay
#PWD123456#RLY-TEXT1#GATE1 DIAN
Reply:
RLY1-TEXT IS GATE1 DIAN OKAY
Then you can use the simple SMS: GATE1 DIAN=5 to trigger the output1 relay for 5 second
#PWD123456#OPEN2-TEXT#GATE2 OPEN
Reply:
OPEN TEXT2IS GATE2 OPEN
Then you can use the simple SMS: GATE2 OPEN to switch on the output2 relay
#PWD123456#CLOSE2-TEXT#GATE2 CLOSE
Reply:
CLOSE TEXT2 IS GATE2 CLOSE
Then you can use the simple SMS: GATE2 CLOSE to switch off the output2 relay
#PWD123456#RLY-TEXT2#GATE2 DIAN
Reply: RLY2-TEXT IS GATE2 DIAN OKAY
Then you can use the simple SMS: GATE2 DIAN=5 to trigger the output2 relay for 5 second
#Battery working and alarm command
(Battery alarm SMS all send to the ALARM phone numbers)
#PWD123456#POWER-CHANGE-ALARM:ON,BCPW-LOW-ALARM:ON:60
POWER-CHANGE-ALARM:
ON or OFF to enable or disable the power change alarm
BCPW-LOW-ALARM:
When the Remaining battery power is lower than 60%,will send the alarm SMS
You will get the reply SMS:
POWER-CHANGE-ALARM:ON,BCPW-LOW-ALARM:ON:60 OKAY
If you want to know the setup of the battery alarm,then send the inquiry SMS:
#PWD123456#POWER-CHANGE-ALARM?
You will receive the SMS reply from the unit :
POWER-CHANGE-ALARM:OFF,BCPW-LOW-ALARM:OFF:60
If you want to know the battery remaining power,then you can send the STATUS? command to
the unit.
When power off,would delay
around 1 minutes
and then send the alarm SMS.
