![background image](http://html1.mh-extra.com/html/wafer/dc200/dc200_manual_3120481004.webp)
WAFER GSM-KEY-DC REMOTE CONTROL UNIT
http://www.waferstar.com
GSM-KEY PC Program Software interface
1.
Setting and Log page switch
2.
Open saved file
3.
Save units phone numbers in your computer for future changes
4.
Save in a new file name
5.
Communitcaton selection ,Com port configuration
6.
Connect to the unit
7.
Select Language
8.
Setting Tab – Insert regular/Special phone numbers,miscellaneous
9.
Log Tab
10.
Phone numbers Tab – Add regular phone numbers 200
11.
Special phone numbers Tab – Add special phone numbers 750
12.
Alarm Phone numbers Tab – Add alarm phone numbers 5
13.
Miscellaneous Tab
The following compand is used in the GSM-KEY :
#PWD
:
Password
#CAP
:
Change
password
#WHL
:
White List (add or remove numbers)
#GOT
:
Gate
pulse
time
#ALARM
:
Alarm information setting
#MODE:
Relay mode
#CSQ
:
Check
Signal
Quality
#SCA:
Set service center address
#STATUS
:
Check status
#OUT
:
Use the SMS to control the switch to ON or OFF
Once you issue a command with an SMS, you will receive a confirmation SMS with OK
if everything is correct or Err if there is an Error.