Waeco PerfectView M9LQ, Installation And Operating Manual

Page: 37 / 276

PerfectView M9LQ Using the LCD monitor
EN 37
8 Using the LCD monitor
I
8.1 Switching on the monitor
➤
If the monitor is switched off, press the
P
button (fig. 0 3, page 6) to switch the
monitor on.
✓ The button lights up green.
✓
Depending on how the monitor is connected, the image appears:
– directly connected to the battery: the previous screen configuration selected
– connected to the ignition: the screen configuration set in the “System setup” sub-
menu, “Power on” parameter.
8.2 Switching off the monitor
➤ Press the
P
button (fig. 0 3, page 6) to switch off the monitor.
✓
The button lights up red.
✓ The picture disappears.
8.3 Set the language
The language in the menu is English by default. You can set the menu language as
follows (fig.
0 , page 6):
➤ Press the “M” button ( 7 ) to open the main menu.
➤
Press the “S” button ( 8 ) until “OSD setup” is highlighted in green.
➤ Press the “–” button ( 4 ) or the “+” button ( 5 ) to open the sub-menu.
➤
Press the “S” button ( 8 ) until “Language” is highlighted in green.
➤ Press the “–” button ( 4 ) or the “+” ( 5 ) until the menu in the required language appears.
8.4 Using menus
To set the monitor with a menu to suit your requirements, proceed as follows (fig. 0 ,
page 6):
Selecting menu items
➤ Press the “M” button ( 7 ) to open the main menu.
✓
The sub-menus to be set are displayed (chapter “Main menu” on page 31).
➤ Press the “S” button ( 8 ) to select the individual sub-menus.
➤
Press the “–” button ( 4 ) or the “+” button ( 5 ) to open the required sub-menu.
✓ The parameters to be set appear.
NOTE
You can find a detailed operating manual on our website at www.dometic.com.