Waeco PerfectView M9LQ, Installation And Operating Manual

Page: 33 / 276

PerfectView M9LQ Installing the LCD monitor
EN 33
Laying the monitor cable
➤
If there are no suitable options available for laying the monitor cable:
Drill a hole with a diameter of
∅
17 mm in the position marked.
➤ Pull the monitor cable through the drill hole.
I
Sticking the monitor bracket onto the dashboard (fig. c A, page 7)
➤ Remove the film from under the monitor bracket.
➤
Stick the monitor bracket to the position of your choice.
Screwing the monitor bracket onto the dashboard (fig. c B, page 7)
➤ Hold the monitor bracket within the outlines marked beforehand.
➤
Mark drilling points.
➤ Drill the holes, with ∅ 2 mm, at each of the markings.
➤
Screw the monitor holder on using 4 x 20 mm self-tapping screws.
Fastening the monitor
➤ Set the monitor on the monitor bracket and secure it with the knurled nut (fig. b ,
page 7).
NOTE
You can fasten the monitor bracket using adhesive or screws.