Cleaning and maintenance
CB-36, CB-40, CB-110, RHD-50
30
To defrost the cooling device, proceed as follows:
➤
Take out the contents of the cooling device.
➤
Place them in another cooling device to keep them cool, if necessary.
➤
Set the knob to “0”.
➤
Leave the cover open.
➤
Wipe off the defrosted water.
Switching off and storing the cooling device
If you do not intend to use the cooling device for a long time, proceed as fol-
lows:
➤
Turn the knob to “0”.
➤
Disconnect the power cable from the battery or pull the DC cable plug out
of the rectifier.
➤
Clean the cooling device (see chapter “Cleaning and maintenance” on
page 30).
➤
Leave the lid or door open for to avoid unpleasant odours building up.
8
Cleaning and maintenance
a
Caution!
Do not use abrasive cleaning agents or hard objects during clean-
ing as these can damage the cooling device.
a
Caution!
Never use brushes, scouring pads or hard or pointed tools to re-
move ice or to loosen objects which have frozen in place.
➤
Clean the cooling device regularly as soon as it becomes dirty with a
damp cloth.
➤
Make sure that no water drips into the sealing. This can damage the elec-
tronics.
➤
Wipe the cooling device dry with a cloth after cleaning.
_CB_RHD_Kühlboxen.book Seite 30 Montag, 27. September 2010 5:23 17
