Waeco AirConServiceCenter ASC5100G, Operating Manual

Page: 90 / 272

EN
Operation ASC5100G
90
8.7.4 Selecting connections
1. Select the parameters in accordance with the air conditioning system
connections:
– Air conditioning system has a high pressure and a low pressure
connection:
Select
LP/HP .
– Air conditioning system only has a high pressure connection:
Select HP .
– Air conditioning system only has a low pressure connection:
Select LP .
2. Press ENTER to confirm.
3. Once all settings have been entered, press ENTER to start the
process.
8.7.5 After ending the air conditioning service
✓ After the air conditioning service has finished, you are prompted to
disconnect the hoses of the AirConServiceCenter from the vehicle air
conditioning system.
1. Disconnect the service hoses ( 7 ) and ( 8 ) and press ENTER to con-
firm.
✓ The service hoses will now be drained. The unit is then ready for
further use.
2. Screw the valve caps of the air conditioning system back on the
connections.
HP/LP PORT
HP PORT
LP PORT
ENTER-OK STOP-EXIT
Process start?
ENTER-OK STOP-EXIT