Waeco AirConServiceCenter ASC5100G, Operating Manual

Page: 67 / 272

EN
67
ASC5100G Initial start-up
7 Initial start-up
7.1 Setting up and switching on
1. Drive the AirConServiceCenter to the workplace.
2. Lock the front wheels (
6 ).
I
3. Connect the AirConServiceCenter to the mains.
4. To switch it on, set the main switch (
12 ) to I.
The switch-on delay runs for 35 seconds and the housing is venti-
lated. The software version number then appears in the display (
1 )
for several seconds:
“SW” : Software status
“DB” : Database
“SN” : Serial number
“LF” : Language file
✓
When the start-up procedure is complete, the AirConServiceCenter
displays the following:
I
NOTE
During operation, the unit must be on a level, flat surface so that
measurements can be made correctly.
WAECO INTERNATIONAL
ASC5100G SW 5ELU0076
DB ldyf1701
SNxxxxxx LF 12340061
Refrigerant g. XXXX
11:56:35 10/03/17
NOTE
Ignore any error codes which occur during commissioning (see
page 105) and skip by pressing
ENTER .