Waeco AirConServiceCenter ASC5100G, Operating Manual

Page: 69 / 272

EN
69
ASC5100G Initial start-up
7.4 Entering company data
The company data is displayed in the service log.
1. In the basic menu, use the cursor keys
 or  to select “Other
selections” :
2. Press ENTER to confirm.
3. Use the cursor key  to select “Service” .
4. Press ENTER to confirm.
5. Enter the password “3282” .
6. The company data is shown in the third line of the display ( 1 ).
You can enter five lines, each with up to 20 characters.
The display shows the number of lines of company data after the
message
“Enter company data” ( “01” to “05” ).
Use the cursor keys  or  to select the line of company data you
want.
7. Use the keypad ( 2 ) and the cursor keys to enter the data.
To switch between upper and lower case, press the Info key .
To delete a character, briefly press the C key.
To delete the current line, press and hold down the C key.
8. Press ENTER to confirm.
9. Press STOP . The set data is activated.
10. Press STOP again to access the standby menu.
Short selection
Free selection
Other selections
ENTER-OK