8
STATUS POWER
PL-500 Component Functions
F R O N T V I E W
Power Switch
Turns the power to the
PL-500 LCD pen tablet
system on or off.
Power Lamp
Lights green when power
has been supplied to the
PL-500 and computer and
a video signal is present.
In addition, this lamp
flashes at two-second
intervals if your com-
puter enters a power
management mode in
which image signals are
not sent.
Integrated Tablet
and LCD Screen
*1
The LCD monitor and
tablet sensor function
as an integrated input
and output device.
The LCD resolution is
1,024 x 768 pixels
at 16,777,216 colors.
The tablet sensor re-
ports pen coordinates,
pressure, switch, and
eraser information.
The characteristics of
the LCD may cause an
inaccurate display of
color tones. It is rec-
ommended that the
tones be checked on a
color-adjusted CRT
monitor.
Status Lamp
Lights green when the
pen tip or a side switch is
pressed, or when the
eraser enters proximity of
the LCD screen.
*1 On a TFT liquid crystal display, a very small number of pixels may be permanently illuminated or not
illuminated at all. This does not mean that the display is defective.
PL500_Content
5/9/2000, 2:06 PM
8
