1 7
R E P L A C I N G T H E P E N T I P
The pen tip will wear with normal use. When the nib gets too short, you can replace it with one
of the extra nibs that came with your UltraPen.
To insert a new nib:
Slide it straight into the barrel of the
pen. Firmly push the nib until it stops.
The new nib will slide into the correct
position.
To remove the old nib:
Clasp it with the o-ring tool that
came with your UltraPen and pull
the old nib straight out of the pen.
If the pen tip wears and becomes angular, it may damage the coating on the cover glass of the
PL-500. To avoid this, periodic nib replacement is recommended.
PL500_Content
5/9/2000, 2:06 PM
17
