14
Macintosh Hardware Cabling Diagram
C
PL-500 Rear Panel
Rear panel
of your
computer
Video card
(DVI or DFP)
CRT
monitor
(optional)
DVI-to-DVI or DVI-toDFP cable
AC Adaptor
To AC
Outlet
A
D
B
CAUTION
Do not connect or disconnect the DVI video
cable while the power cable is attached to
the PL-500 or your computer is turned on
–
this can damage the LCD display or computer
video card.
D R I V E R I N S T A L L A T I O N F O R M A C I N T O S H
2
. Install the Wacom Tablet Driver Software
After connecting the hardware to your computer and setting up the PL-500 as a monitor, you must
install the tablet software from the Wacom CD.
■
Disable any virus protection programs and close all open applications before installing the
software.
■
Insert the Wacom CD into your computer’s CD-ROM drive.
■
Double-click on the
Install
icon. Choose your language option, click
OK
, and follow the
prompts.
■
Adobe Acrobat Reader V4.0 or greater is required to view the online Help. When the Wacom
tablet Read Me file displays, select
Continue...
to install Adobe Acrobat Reader, or
Quit
to
finish without installing Acrobat Reader.
■
Restart your computer. You may register your tablet when prompted. (Electronic registration
is only available in some regions.)
You should now be able to use your UltraPen on the tablet to move the screen cursor.
You now need to calibrate the tablet so that the screen cursor position lines up with the position
of the UltraPen. (See
Calibrating the PL-500
on page 20.) Be sure you have selected the PL-500
as the monitor to calibrate.
E
PL500_Content
5/9/2000, 2:06 PM
14
