Wacker Neuson LTV6K, Operator'S Manual

Page: 60 / 110

wc_tx004431gb_FM10.fm
60
Operation LTV
5.7 Resetting the Maintenance Timers – DeepSea
Background The maintenance timers are preset on the controller. When the timer expires, the
alarm will display in the upper right corner of the screen. The maintenance timers
are preset as follows:
■
Oil change interval: 750 hours
■
Air filter change interval: 250 hours
■
Fuel filter change interval: 500 hours
Procedure After the required maintenance has been completed, perform the following
procedure to reset a maintenance timer.
1. Use the up and down arrows (a) to navigate to the applicable screen.
2. Press and hold the “Stop” button (b) for 10 seconds. The timer will reset.
b
a
wc_gr012367