Wacker Neuson LTV6K, Operator'S Manual

Page: 31 / 110

wc_tx004429gb_FM10.fm
31
LTV Lifting and Transporting
3.2 Preparing the Machine for Transport on a Truck or Trailer
Requirements
■
Machine stopped .
■
Flatbed truck or trailer capable of supporting the machine’s weight.
■
Chains, hooks, or straps capable of supporting the machine’s weight.
Checklist Before transporting the machine, check the following items:
Machine

All doors and access panels of the machine are closed.

All electrical connections are disconnected from the machine.

The generator is shut down.

The tower is completely lowered.

The outriggers are in the travel position.

The outrigger bars and jacks are locked in place.

The tongue jack is in the travel position.
Loading and transporting equipment

The transport vehicle or trailer can support the weight of the machine.

The wheels of the transport vehicle or trailer are chocked during the loading
process.

The transport vehicle or trailer is clean and free of grease, oil, ice, and other
loose material.

Do not use the machine’s trailer jack to support the trailer tongue during
transporting.

Check that any ramps used in the loading process:
■
Can support the weight of the machine
■
Are clean and free of grease, oil, ice, and other loose material.
■
Are securely connected to the transport vehicle or trailer.
■
Are of sufficient length to keep the loading angle 15° or less.
In addition:

The loading area is flat and the ground is stable.

The overall height of the machine once loaded. Plan your travel route so that
there will be adequate clearance for overpasses, road signs, buildings, etc.

Check local regulations regarding transporting and obey these regulations.
WARNING
Crushing hazard. Improperly securing the machine can lead to a crushing hazard.
►
Use only the designated tie-down points to secure the machine to a truck or
trailer.