Wacker Neuson LTV6K, Operator'S Manual

Page: 58 / 110

wc_tx004431gb_FM10.fm
58
Operation LTV
5.6 Alarms and Shut-Down Conditions – DeepSea
Background The Light Tower controller monitors variables of engine and machine function. The
Light Tower controller has two types of alarms: warning alarms and shut-down
alarms.
Warning
alarms Warnings are non-critical alarm
conditions that do not affect the operation
of the generator system. They serve to
draw the operator’s attention to an
undesirable condition. Warning alarms
are self-resetting when the fault condition
is removed.
Warning alarms include:
a. Generator over-frequency
b. Generator under-frequency
c. Time to maintenance-oil
d. Time to maintenance-air filter
e. Time to maintenance-fuel filter
During a warning alarm condition, the
LCD panel displays the type of warning
alarm. The machine is not shut down.
Shut-down
alarms Shut-down alarms are latching alarms
and stop the generator. Shut-down
alarms include:
f. High coolant temperature
g. Low oil pressure
h. Overspeed
i. Underspeed
j. Generator over-frequency
k. Generator under-frequency
l. Overcrank
m.Low coolant level (if equipped)
n. Emergency stop
During a shut-down alarm condition, the
LCD panel displays the type of alarm that
caused the machine shutdown. Remove
the fault condition, then press “Stop”.
This procedure continues on the next page.
wc_gr012354
a
b
c
d
e
wc_gr012355
f
g
h
j
i
k
n
l