manualshive.com logo in svg

Wacker Neuson KRAMER 5055e, Operator'S Manual


Share
Download
background image

4-20

BA 357-00 *  3.0 * 35700_04_Inbetriebnahme_01.fm

4 Putting into operation

Battery connector

DANGER

Risk of electric shock from defective components or contact with the 
high-voltage system!

Causes serious injury or death.

►

Before opening the battery cover plate, actuate the motor isolating 
switch and remove the ignition key.

►

The battery cover plate may only be opened by specially trained 
personnel.

►

Do not touch damaged high-voltage system components or cables 
(orange-labeled).

The battery connector connects or disconnects the entire electrical system 
from the battery. 
If the battery and electrical system have been disconnected from each 
other, the machine cannot be turned on by unauthorized persons.
The battery connector is located under the battery cover plate in the 
vicinity of the battery.

Information

The following illustrations of the battery connector are only intended to 
serve as an example. The location and surroundings of the battery 
connector may deviate from the representation shown.

Summary of Contents for KRAMER 5055e





































































































































































































































































































































































































































Reviews:

No comments

Related manuals for KRAMER 5055e

Brands by name

Popular brands

Load more brands