manualshive.com logo in svg

Wacker Neuson KRAMER 5055e, Operator'S Manual


Share
Download
background image

5-30

BA 357-00 *  3.0 * 35700_05_Bedienung.fm

5 Operation

5.9

Operating hydraulics

Important safety instructions on loader unit operation

DANGER

Electric shock due to overhead electric lines!

Caution, danger! Electric arcs can form when approaching overhead 
electrical lines.

►

Keep away from overhead electric lines.

►

Contact the energy supplier before working under overhead electric 
lines.

WARNING

Danger of accident due to uncontrolled movements of the joystick!

Uncontrolled movements of the joystick can cause serious injury or death.

►

Operate the machine only from the operator seat.

►

Work calmly and carefully.

►

Avoid fast and sudden movements of the joystick.

►

Lower the loader unit to the ground during work interruptions or when 
finishing work.

►

Secure the joystick before performing machine travel on public roads.

►

Secure the joystick before leaving the machine.

Summary of Contents for KRAMER 5055e





































































































































































































































































































































































































































Reviews:

No comments

Related manuals for KRAMER 5055e

Brands by name

Popular brands

Load more brands