manualshive.com logo in svg

Wacker Neuson KRAMER 5055e, Operator'S Manual, Page: 256 / 420

Share
Download
Wacker Neuson KRAMER 5055e Operator'S Manual Download Page 256

7-4

BA 357-00 *  3.0 * 35700_07_Wartung.fm

7 Maintenance

CAUTION

Risk of injury due to hot parts!

The power electronics and the electric motors can
become hot during operation.

►

Before folding up the operator seat, allow 
the components to cool down.

►

Wear protective equipment.

NOTICE

Damage from loose parts in the battery compartment.

►

Remove all tools and objects from the battery compartment before 
closing the battery cover plate.

NOTICE

Damage from using incorrect cleaning agents.

►

Select cleaning agents depending on the material
of the parts that need to be cleaned.

►

Rubber parts and electrical components must not be cleaned with 
solvents or steam. Water can cause short circuits in the electrical 
system and damage.

Summary of Contents for KRAMER 5055e





































































































































































































































































































































































































































Reviews:

No comments