wc_tx003206gb.fm
31
HDR 155
Operation
4.8
Recommended Fuels and Fuel Blending Guide
Low ambient temperatures cause diesel fuels to gel. Gelled fuels will cause burner
ignition failure and/or burner fuel pump damage. Always use the proper fuel for the
conditions.
NOTICE:
Do not use B20 or any other type of biodiesel fuel in this machine.
4.9
Preliminary Checks
Checks
Before starting the machine, check the following items.
Fuel tank full
Fuel tank cap secure
Operation mode switch in the OFF position
Power supply connected
Remote thermostat (if applicable) installed
Lower (floor) guard fully extended
Reset button illuminated green
Note:
If the button is illuminated red, it must be pressed to reset the machine.
Fuel Blend Guide
Lowest expected ambient
temperature °F (°C)
Generator-powered
Shore-powered
Below 5 (-15)
50-50 blend of #2 diesel
and #1 diesel, plus
additives
OR
50-50 blend #2 diesel and
K1 kerosene, plus
additives
100% #1 diesel plus
additives
OR
100% K1 kerosene,
plus additives
5 to 25 (-15 to -4)
70-30 blend of #2 diesel and #1 diesel, plus additives
OR
70-30 blend of #2 diesel and K1 kerosene,
plus additives
Above 25 (-4)
Winter-blend diesel
CAUTION
Fire hazard.
f
Do not use gasoline, crankcase oil, or any oil containing gasoline.