wc_si000732gb.fm
13
HDR 155
Safety Information
Personal
Protective
Equipment
(PPE)
Wear the following Personal Protective Equipment (PPE) while operating this
machine:
■
Close-fitting work clothes that do not hinder movement
■
Safety glasses with side shields
■
Hearing protection
■
Safety-toed footwear
General
operation
safety
Follow the guidelines below when placing the machine in the workspace.
■
Position the machine on a firm, noncombustible, level surface.
■
Ensure the machine cannot tip over, slide, or fall during operation.
■
Keep the area immediately surrounding and underneath the machine clean,
neat, and free of debris and combustible materials.
■
Keep the area above the machine clear of debris that could fall on the machine.
■
Do not position electrical cords under the machine or over the top of the
machine.
■
Do not operate the machine if it is positioned in pooled water or snow.
While
operating the
machine
■
Inspect the machine before startup, and monitor it regularly during operation.
■
Do not exceed the maximum heat output of the machine.
■
After use, disconnect power from the machine.
After Use
■
Ensure that the machine will not tip over, roll, slide, or fall when not being
operated.
■
Store the machine properly when it is not being used. The machine should be
stored in a clean, dry location out of the reach of children.
1.4
Safety Guidelines for Lifting the Machine
When lifting the machine:
■
Make sure slings, chains, hooks, ramps, jacks, forklifts, cranes, hoists, and any
other type of lifting device used is attached securely and has enough weight-
bearing capacity to lift or hold the machine safely. See chapter
Technical Data
for machine weight.
■
Remain aware of the location of other people when lifting the machine.
■
Only use the lifting points and tie-downs described in the Operator’s Manual.
■
Make sure the transporting vehicle has sufficient load capacity and platform size
to safely transport the machine.
To reduce the possibility of injury:
■
Do not stand under the machine while it is being lifted or moved.
■
Do not get onto the machine while it is being lifted or moved.
WARNING
Fire hazard. Do not move the machine while it is operating or while it is plugged in,
even if power is lost.
Ñ Turn off the machine, wait 10 minutes, disconnect power cord, and let it cool
completely.
