4-20
BA ET16 de* 1.0 * et16i400.fm
4 Putting into operation
Shatter protection (option)
DANGER
Danger of piercing/penetration by objects from the front!
Work involving the danger of piercing/penetrating objects from the front
can cause accidents with serious injury or death.
►
To operate the vehicle, shatter protection must be installed if an
attachment (a breaker, for example) causes fragments to fly around.
This shatter protection takes over the function of a front window.
►
Observe the prescribed work area - see
.
CAUTION
Danger of accident with restricted visibility!
Restricted visibility (e.g. weather influences, dust) can cause serious
injury or death.
►
Resume work only if visibility is no longer restricted.
NOTICE
Do not use brushes, steel wool or other abrasive cleaners for cleaning the
polycarbonate disk. Do not wipe dust in a dry state.
Information
The shatter protection protects the operator against fragments from the
front.
►
The machine owner must ensure that the hazard situation is evaluated
and that the national regulations are observed.
►
The machine owner must ensure that only work is performed that does
not require any higher protection.
►
Accidents cannot be fully avoided despite equipping a machine with
protective structures.
Job site
Work range height
A
: 120 cm (47 in),
B
: 50 cm (20 in)
Fig. 90 (symbolic representation)
B
A
45°
Summary of Contents for ET16
