manualshive.com logo in svg

Wacker Neuson ET16, Operator'S Manual, Page: 116 / 248

Share
Download
Wacker Neuson ET16 Operator'S Manual Download Page 116

5-14

BA ET16 de*   1.0 *  et16b510.fm

 

5 Operation

Rotating the upper carriage

WARNING

Crushing hazard due to rotating range of machine!

Persons in the rotation range of the machine can be seriously injured or 
killed.

►

Do not allow anyone to stay in the danger zone.

NOTICE

Possible damage to machine when working in the immediate vicinity of 
walls, parts of buildings or other obstacles.

►

Ensure that there are no obstacles is in the danger zone.

Information

As long as the hydraulic fluid has not reached its operating temperature, 
the upper carriage can continue moving after releasing the control lever. 
Operate the control lever carefully in a cold operating state.

Fig. 120

Rotating the upper 
carriage

Position

To the left

Push the control lever on the left to the left

To the right

Push the control lever on the left to the right

Fig. 121

Summary of Contents for ET16

























































































































































































































































Reviews:

No comments