Wacker Neuson ET16 Page 118 Operator'S Manual Download

Page: 118 / 248

5-16

BA ET16 de* 1.0 * et16b510.fm

5 Operation

Stabilizer blade

WARNING

Crushing hazard due to unintentional actuation!

Unintentional actuation can cause serious injury or death.

►

Raise the control lever base.

►

Lower the stabilizer blade to the ground after the work shift.

►

Do not allow anyone to stay in the danger zone.

NOTICE

Lowering the stabilizer blade too deeply into the ground can create
increased resistance.

►

Slightly raise the stabilizer blade. The clearance between the stabilizer
blade and the ground should be about 1 cm (0.4 in).

►

Check the stabilizer-blade position before performing machine travel.

Information

In order to achieve the best possible stability, lower the stabilizer blade.

The stabilizer blade is also used as a parking brake. Press the stabilizer
blade against the ground.

Summary of Contents for ET16

























































































































































































































































Search results

Summary of Contents for ET16

Reviews:

Related manuals for ET16

Brands by name

Popular brands

Wacker Neuson ET16, Operator'S Manual

Search results

Summary of Contents for ET16

Reviews:

Related manuals for ET16

Brands by name

Popular brands