Wacker Neuson ET16 Page 15 Operator'S Manual Download

Page: 15 / 248

BA ET16 de* 1.0 * Safety_01_0.fm

2-1

Safety 2

Safety

2.1

Safety symbols and signal words

Explanation

The following symbol identifies safety instructions. It is used for warning
against potential personal risk or danger.

DANGER

DANGER identifies a situation causing death or serious
injury if it is not avoided.

Consequences in case of non-observance.

►

Avoidance of injury or death.

WARNING

WARNING identifies a situation that can cause death or
serious injury if it is not avoided.

Consequences in case of non-observance.

►

Avoidance of injury or death.

CAUTION

CAUTION identifies a situation that can cause injury if it is
not avoided.

Consequences in case of non-observance.

►

Avoidance of injury.

NOTICE

NOTICE identifies a situation that causes damage to the
machine if it is not observed.

►

Avoidance of damage to property.

Safety

Summary of Contents for ET16

























































































































































































































































Search results

Summary of Contents for ET16

Reviews:

Related manuals for ET16

Brands by name

Popular brands

Wacker Neuson ET16, Operator'S Manual

Search results

Summary of Contents for ET16

Reviews:

Related manuals for ET16

Brands by name

Popular brands