Wacker Neuson ET16 Page 192 Operator'S Manual Download

Page: 192 / 248

7-24

BA ET16 de* 1.0 * et16w700.fm

7 Maintenance

7.6

Lubrication work

– see chapter “ Preparing lubrication” on page 7-8

7.7

Fuel system

Important information regarding the fuel system

Information

In order to prevent wet stack, fill up the fuel tank completely at the end of
each workday.

Information

Do not run the fuel tank completely dry. Otherwise, air is drawn into the
fuel system. This requires bleeding the fuel system.

Diesel fuel specification

NOTICE

Engine damage due to incorrect or dirty diesel fuel.

►

Only use clean diesel fuel according to the

fluids and lubricants

list.

►

Do not use any diesel fuel with additives.

Summary of Contents for ET16

























































































































































































































































Search results

Summary of Contents for ET16

Reviews:

Related manuals for ET16

Brands by name

Popular brands

Wacker Neuson ET16, Operator'S Manual

Search results

Summary of Contents for ET16

Reviews:

Related manuals for ET16

Brands by name

Popular brands