5-26
BA ET16 de* 1.0 * et16b510.fm
5 Operation
Picking up an attachment
1. Hook up the quick coupler system
A
in the attachment bolt
B
.
2. Slightly screw in the quick coupler system
A
, lift the shovel arm until
the attachment is suspended about 30 cm (12 in) above the ground.
3. Extend the bucket cylinder so that the edge
C
of the attachment
touches the quick coupler system.
4. Screw in the quick coupler system
A
until the attachment lies
completely on the quick coupler system
A
due to its weight.
5. Shut off the engine and store the ignition switch key safely.
6. Screw socket wrench
D
clockwise until the bolts
E
completely engage
in the openings
G
of the quick coupler system
A
.
➥
The quick coupler system is locked.
7. Remove the socket wrench and perform a visual inspection.
8. Start the engine.
Fig. 142
A
B
C
Fig. 143
A
Fig. 144
E
D
Summary of Contents for ET16
