Wacker Neuson ET09-02 Operator'S Manual Download Page 97

Page: 97 / 248

BA ET16 de* 1.0 * et16i400.fm

4-37

Putting into operation 4

Starting aid

WARNING

Explosion hazard in case of incorrect handling of battery!

Incorrect battery handling can cause serious injury or death.

►

Wear protective equipment.

►

Fire, open flames and smoking is prohibited

►

Do not jump start the engine if the battery is malfunctioning or frozen,
or if the acid level is too low.

WARNING

Injury hazard due to rotating parts!

Rotating parts can cause serious injury or death.

►

Open the engine cover only at engine standstill.

CAUTION

Burn hazard due to hot surfaces!

Can cause serious burns.

►

Stop the engine and let it cool down.

►

Wear protective equipment.

NOTICE

Possible damage due to electrical short circuit or overvoltage.

►

The positive terminal of the starting battery must not be brought into
contact with electrically conductive vehicle components.

►

The vehicles must not touch each other during the starting aid.

►

If the engine still does not start despite a starting aid, contact a Wacker
Neuson service center.

Summary of Contents for ET09-02

























































































































































































































































Search results

Summary of Contents for ET09-02

Reviews:

Related manuals for ET09-02

Brands by name

Popular brands

Wacker Neuson ET09-02, Operator'S Manual

Search results

Summary of Contents for ET09-02

Reviews:

Related manuals for ET09-02

Brands by name

Popular brands