Wacker Neuson ET09-02 Operator'S Manual Download Page 201

Page: 201 / 248

BA ET16 de* 1.0 * et16w700.fm

7-33

Maintenance 7

Cleaning the radiator

CAUTION

Burn hazard due to hot surfaces!

Hot radiators can cause burns.

►

Stop the engine and let it cool down.

►

Wear protective equipment.

NOTICE

Damage to diesel engine and hydraulic system due to dirt on the radiator.

►

Check and if necessary clean the radiator once a day.

►

In dusty or dirty work conditions, clean more frequently than indicated
in the maintenance plan.

NOTICE

Damage to radiator fins during cleaning.

►

Keep a safe distance from the radiator during cleaning.

►

Use oil-free compressed air (2 bar/29 psi max.) to clean.

The radiators are located under the right side cover

1. Stop and park the machine. Stop the engine. See “Preparing

lubrication”.

2. Remove the right side cover

3. Remove dust and other foreign bodies from the fins with compressed

air.

4. Attach the right side cover

Fig. 234

Summary of Contents for ET09-02

























































































































































































































































Search results

Summary of Contents for ET09-02

Reviews:

Related manuals for ET09-02

Brands by name

Popular brands

Wacker Neuson ET09-02, Operator'S Manual

Search results

Summary of Contents for ET09-02

Reviews:

Related manuals for ET09-02

Brands by name

Popular brands