Wacker Neuson ET09-02, Operator'S Manual

Page: 100 / 248

4-40
BA ET16 de* 1.0 * et16i400.fm
4 Putting into operation
Low-load operation
NOTICE
Possible damage to the engine due to low-load operation.
► Run the engine at idling speed or at high engine speed at over 20 %
engine load.
Possible consequences of low-load operation are:
• Increased engine oil consumption
• Engine oil in the exhaust system causes engine contamination
• Blue smoke in exhaust gas
Stopping the engine
NOTICE
Possible damage to the engine when it is stopped after running under high
load.
► Operate the engine at idling. This avoids engine damage and
increases the service life.
1. Let the engine run at idling speed for five minutes without any load.
2. Turn the starting key to “
0 ” and remove it.
Fig. 102
0
1
2
3
P