manualshive.com logo in svg

Wacker Neuson E13-01, Operator'S Manual, Page: 202 / 252

Share
Download
Wacker Neuson E13-01 Operator'S Manual Download Page 202

7-36

BA EZ17 en*   1.1 *  ez17w700.fm

 

7 Maintenance

Cleaning the radiator

CAUTION

Burn hazard due to hot surfaces!

Hot radiators can cause burns.

►

Stop the engine and let it cool down.

►

Wear protective equipment.

NOTICE

Damage to diesel engine and hydraulic system due to dirt on the radiator.

►

Check and if necessary clean the radiator once a day.

►

In dusty or dirty work conditions, clean more frequently than indicated 
in the maintenance plans.

NOTICE

Damage to radiator fins during cleaning.

►

Keep a safe distance from the radiator during cleaning.

►

Use oil-free compressed air (2 bar/29 psi max.) to clean.

Radiator 

A

 and the hydraulic oil cooler 

B

 are located in the engine 

compartment.

1. Stop and park the machine. Stop the engine. See “Preparing 

lubrication”.

2. Remove the cover on the right.
3. Remove dust and other foreign bodies from the fins with compressed 

air.

4. Install the cover on the right.

Fig. 223

A

B

Summary of Contents for E13-01





























































































































































































































































Reviews:

No comments