manualshive.com logo in svg

Wacker Neuson E13-01, Operator'S Manual, Page: 15 / 252

Share
Download
Wacker Neuson E13-01 Operator'S Manual Download Page 15

BA EZ17 en*   1.1 *  Safety_01_0.fm 

2-1

Safety 2

2

Safety

2.1

Safety symbols and signal words

Explanation

The following symbol identifies safety instructions. It is used for warning 
against potential personal risk or danger.

DANGER

DANGER identifies a situation causing death or serious 
injury if it is not avoided.

Consequences in case of non-observance.

►

Avoidance of injury or death.

WARNING

WARNING identifies a situation that can cause death or 
serious injury if it is not avoided.

Consequences in case of non-observance.

►

Avoidance of injury or death.

CAUTION

CAUTION identifies a situation that can cause injury if it is 
not avoided.

Consequences in case of non-observance.

►

Avoidance of injury.

NOTICE

NOTICE identifies a situation that causes damage to the 
machine if it is not observed.

►

Avoidance of damage to property.

Safety

Summary of Contents for E13-01





























































































































































































































































Reviews:

No comments