manualshive.com logo in svg

Wacker Neuson E13-01, Operator'S Manual, Page: 191 / 252

Share
Download
Wacker Neuson E13-01 Operator'S Manual Download Page 191

BA EZ17 en*   1.1 *  ez17w700.fm 

7-25

Maintenance 7

Engine compartment

1. Park the machine in a wash bay or place suitable for washing.
2. Stop the engine. See “

Preparing lubrication

”.

3. Clean the machine.

Seat belt

Always keep the seat belt clean, as coarse dirt can impair the proper 
functioning of the seat belt buckle.
Clean the seat belt (while it remains fitted in the machine) with a mild soap 
solution only. Do not use chemical agents as they can destroy the fabric.

Cleaning in a saline environment

1. Park the machine in a wash bay or place.
2. See “

Preparing lubrication

”.

3. Check the machine for salt deposits or corrosion. Have corrosion 

removed by a Wacker Neuson service center.

4. Clean the machine with a high-pressure cleaner. Clean the machine 

ensuring that there are no salt deposits in places that are difficult to 
access.
Bear in mind the information on cleaning and maintenance.

5. Lubricate the machine according to the lubrication plan.
6. Allow the machine to dry and check it again for salt deposits.

Loose threaded fittings and attachments

Contact a Wacker Neuson service center.

Summary of Contents for E13-01





























































































































































































































































Reviews:

No comments