background image

BA D24 en/us* 1.0 * D24_1_0_400.fm 

4-15

Putting into operation 4

Responsibility for vehicle equipped with protective structures

The decision regarding the necessary protective structures (type and 
category I or II) must be made by the company/person operating the 
machine and depends on the specific work situation.
The vehicle operator must observe the national regulations and must 
inform the operator on the protective structure to be used in a specific 
work situation. 

Cabin FOPS category II 

Information

The cabin complies with the FOPS category level II requirements 
according to EN ISO 3449:2008
► The machine owner must ensure that the hazard situation is evaluated 

and that the national regulations are observed.

► The machine owner must ensure that only work is performed that does 

not require any higher protection.

► Accidents cannot be fully avoided despite equipping a vehicle with 

protective structures.

Summary of Contents for DV60





















































































































































































































Reviews: