Wacker Neuson DV60 Page 172 Operator'S Manual Download

Page: 172 / 212

7-22

BA D24 en/us* 1.0 * D24_1_0_700.fm

7 Maintenance

7.8

Engine lubrication system

Important information regarding the engine lubrication system

NOTICE

Possible engine damage from improper handling of engine oil.
► Use engine oil according to the

Fluids and lubricants

list.

► Have the oil changed only by a Wacker Neuson service center.
► Add the engine oil slowly so it can go down without entering the intake

system.

► The oil level must be between the MIN and MAX marks.

Information

Check the oil level once a day. Wacker Neuson recommends checking
before starting the engine. Check the oil level not less than five minutes
after stopping the engine.

Summary of Contents for DV60





















































































































































































































Search results

Summary of Contents for DV60

Reviews:

Related manuals for DV60

Brands by name

Popular brands

Wacker Neuson DV60, Operator'S Manual

Search results

Summary of Contents for DV60

Reviews:

Related manuals for DV60

Brands by name

Popular brands