Wacker Neuson DV60, Operator'S Manual

Page: 202 / 212

9-12
BA D24 en/us* 1.0 * D24_1_0_900.fm
9 Technical data
9.12 Vibrations
Vibration values indicated in m/s².
Directive 2002/44/EC of European Parliament and Council on minimum
health and safety requirements regarding exposure of workers to risks
arising from physical agents (vibration).
Indications on hand-arm vibration
Hand-arm vibration is less than 2.5 m/s² during correct vehicle operation.
Indications on whole-body vibration
Whole-body vibration is less than 0.5 m/s² during correct vehicle
operation.
Uncertainty of measurement K has been taken into account for the
specified values.
The degree of vibration is influenced by various parameters.
Some of them are listed below:
• Operator: training, behavior, working method, and load.
• Job site: organization, preparation, surroundings, weather conditions,
and material.
• Machine: version, seat quality, quality of suspension system, attach-
ments, and condition of attachments.
Precise indications on the vibration degrees cannot be made for the
vehicle.
Determination of vibration level for the three vibration axes.
• Under typical operating conditions, use the average vibration values
measured.
• In order to obtain the estimated vibration value for an experienced
operator on level ground, subtract the factors from the average
vibration value.
• In case of an aggressive working method or difficult terrain, add the
environmental factors to the average vibration level in order to obtain
the estimated vibration level.
Vibration
Effective acceleration value for the upper extremi-
ties of the body (hand-arm vibration) < Trigger value
< 2.5 m/s
2
Effective acceleration value for the body (whole-
body vibration)
< 0.5 m/s
2