Wacker Neuson DV60, Operator'S Manual

Page: 185 / 212

BA D24 en/us* 1.0 * D24_1_0_710.fm
7-35
Maintenance 7
Wheel change
NOTICE
Support the vehicle and raise it so that it is not damaged.
Information
Note the direction of travel of the tires.
1. Park the vehicle on firm, level, and horizontal ground.
2. Apply the parking brake.
3. Use wheel chocks to prevent the machine from rolling away.
4. Loosen the wheel nuts of the wheel you want to remove.
5. Place a jack with a lift capacity of 5000 kg (11,023 lbs) under the axle
mounting ensuring stability.
6. Raise the machine on the side where you want to change a wheel.
7. Check the machine is standing firmly.
8. Secure the machine with trestles in appropriate places.
9. Loosen and remove the wheel nuts.
10.Remove the wheel.
11.Place the new wheel onto the wheel bolts.
12.Tighten opposite wheel nuts alternately.
13.Remove the trestles.
14.Lower the raised side of the machine.
15.Tighten opposite wheel nuts alternately to 450 Nm (332 ft.lbs).
7.19 Maintenance of attachments
Not available.
7.20 Maintenance of options
– see chapter “7.2 Maintenance overview” on page 7-2
Fig. 179