Wacker Neuson DV60 Page 111 Operator'S Manual Download

Page: 111 / 212

BA D24 en/us* 1.0 * D24_1_0_500.fm

5-3

Operation 5

5.3

Brakes

Service brake

The service brake is located on the left in the leg room of the seat console.
The travel speed is progressively reduced with the service brake

The machine slows down when the accelerator pedal is released.

Information

Reduce the travel speed with service brake

Parking brake

The parking brake

is located in the switch panel to the right on the

control stand.

WARNING

Accident hazard! Do not operate the unlocking device during
machine travel!

Can cause serious injury or death.

► Use the parking brake only at machine standstill.

Enable:

1. Press switch

down.

The parking brake is automatically activated when the vehicle stands still
in the neutral position of the forward-reverse control for 2 seconds.
(option)

Fig. 101 Service brake

Fig. 102

Summary of Contents for DV60





















































































































































































































Search results

Summary of Contents for DV60

Reviews:

Related manuals for DV60

Brands by name

Popular brands

Wacker Neuson DV60, Operator'S Manual

Search results

Summary of Contents for DV60

Reviews:

Related manuals for DV60

Brands by name

Popular brands