Wacker Neuson DS 70, Operator'S Manual

Page: 38 / 50

wc_tx003058gb.fm
38
Maintenance DS 70
5.7 Inspecting the Machine
When After the first five hours, and every week or every 25 hours thereafter (whichever
comes first)
Requirements
„
Engine stopped
„
Machine cool to the touch
„
Replacement parts as needed (refer to the Parts Book)
Procedure 1. Perform a walk-around inspection of the machine. Check for:
†
Loose or missing fasteners
†
Cracked, corroded, or missing parts
†
Damaged controls
2. Tighten loose fasteners. Replace missing fasteners as needed.
3. Replace damaged or missing parts. Use only Wacker Neuson replacement
parts or those parts equivalent to the original in all types of specifications, such
as physical dimensions, type, strength, and material.
Result The machine has now been inspected.
CAUTION
Injury hazard.
f
Do not operate the machine if any safety devices, guards, controls, or fasteners
are loose, missing, or inoperative.