wc_tx003057gb.fm
26
Operation
DS 70
4.4
Position of the Operator
For optimal control, performance, and minimal hand/arm vibration, follow the
guidelines below when using the machine.
Grasp the handle with both hands as shown.
Stand behind the rammer, walking slowly and guiding the direction of travel as the
machine moves forward.
Note:
Hand/Arm Vibration (HAV) has been optimized for the hand position shown.
Reported HAV levels are measured at position
A
in conformance with EN 1033 and
ISO 5349.
4.5
Before Starting
1. Read safety instructions at the beginning of this manual.
2. Perform daily maintenance items.
3. Place rammer on loose soil or gravel. DO NOT start rammer on hard surfaces
such as asphalt or concrete.
Summary of Contents for DS 70
Page 6: ......
Page 48: ...wc_td000405gb fm 48 Technical Data DS 70 7 6 Dimensions mm in...
Page 50: ......
