Wacker Neuson DS 70, Operator'S Manual

Page: 21 / 50

wc_tx003056gb.fm
21
DS 70 Lifting and Transporting
3 Lifting and Transporting
3.1 Lifting the Rammer
Requirements
„
Lifting device (crane or hoist) capable of supporting the rammer’s weight (see
the identification plate on the rammer)
„
Lifting gear (hooks, slings, and/or chains) capable of supporting the rammer’s
weight
„
Engine stopped and cool to the touch
Procedure Perform the procedure below to lift the rammer.
1. Attach the lifting gear to the central lifting cable (a) .
2. Lift the rammer a short distance, making sure that all connections are secure.
3. Continue lifting the rammer as required.
wc_gr009035
a
e
WARNING
Crushing hazard. Do not use the guide handle (e) to lift the rammer.
f
Use only the central lifting cable to lift the rammer.
WARNING
Crushing hazard. Do not use the central lifting cable if there are any signs of cut
wires, excessive wear, or other defects.
f
Always inspect the central lifting cable for wear, damage, or abuse. Replace a
damaged lifting cable immediately.
f
Protect the central lifting cable from all sharp edges.