Wacker Neuson DS 70, Operator'S Manual

Page: 31 / 50

wc_tx003058gb.fm
31
DS 70 Maintenance
5 Maintenance
5.1 Periodic Maintenance Schedule
The table below lists basic machine maintenance. Tasks designated with check
marks may be performed by the operator. Tasks designated with square bullet
points require special training and equipment.
WARNING
A poorly maintained machine can malfunction, causing injuries or permanent
damage to the machine.
f
Keep the machine in safe operating condition by performing periodic mainte-
nance and making repairs as needed.
Daily
before
starting After
first
5 hours
Every
week
or 25
hours Every
month
or 100
hours
Every
3
months
or 300
hours Every
5
months
or 500
hours
Checkand replace air filter as needed.
3
Check ramming system oil level in sight-
glass.
3
Check fuel line and fittings for cracks or
leaks. Replace as needed.
„
Tighten ramming shoe hardware.
„ „
Inspect the machine.
3 3
Clean engine cooling fins.
3
Check and adjust valve clearance. **
„ „
Change engine oil.*
„
Replace engine oil filter.**
„
Change ramming system oil.*
„
Inspect central lifting cable for wear,
damage, or abuse.
3
Replace engine oil filter.
„
Replace fuel filter.
„
* Perform initially after first 50 hours of operation.
** Perform initially after first 25 hours of operation.
Note: If engine performance is poor, check, clean, and replace air filter elements as needed.