3 Security
18
100_0202_si_0006.fm
3.7.3
Safety distances
Compaction work close to buildings can cause damage. For this reason, all po-
tential impacts and vibrations have to be tested on surrounding buildings in ad-
vance.
The relevant rules and regulations for measuring, evaluating, and reducing vibra-
tion emissions — especially the DIN 4150-3 — must be considered.
Wacker Neuson accepts no liability for any damage to buildings.
3.8
General safety instructions - combustion engines
The following instructions must be adhered to:
Before starting work, check the engine to ensure there are no leaks and/or
cracks in the fuel lines, tank, and fuel cap.
Do not use a defective engine. Replace damaged parts immediately.
The preset engine speed must not be adjusted. This could lead to engine
damage.
Make sure that the exhaust system of the engine is free of debris. Fire haz-
ard!
Switch off before refueling the engine.
Use the correct fuel type. Fuel must not be mixed with other liquids.
For refueling, use clean filling aids. Do not spill fuel; wipe up any spilled fuel
immediately.
Engine must not be started near spilled fuel. Explosion hazard!
When operating in partially-enclosed spaces sufficient ventilation must be
provided. Do not breathe in exhaust fumes. Poisoning hazard!
The engine surface and exhaust system can quickly become extremely hot.
Risk of burns!
Notice:
This machine is equipped with an EPA-certified engine.
Adjusting the speed influences the EPA certification and emissions.
Adjustments to this engine may only be carried out by a professional.
For more information, contact the engine manufacturer or the Wacker
Neuson contact partner.
