Wacker Neuson DPU 100, Operator'S Manual

Page: 13 / 72

3 Security
13
100_0202_si_0008.fm
Protective hood
The covers protect the operator from hot engine parts and noise.
Emergency shutdown switch
The emergency shutdown switch is used solely to deactivate the machine in the case of danger.
Activating the emergency shutdown switch results in the machine immediately turning off. Operation can
only be resumed after unlocking the emergency shutdown switch.
Automatic central position of control handle
If the control handle is released in full load, it automatically returns to the central position and the
machine enters stand vibration.
3.14.1 Safety shutdown – Remote-controlled machinery
The machine is operated via an infrared remote control. For safety reasons, it switches off
vibration and movement in the following situations:

When the operator enters the proximity area (approx. 1–2 meters from a receiving unit).

When the operator leaves the receiving area (a maximum of 20 meters from the machine).

Interruption of the clear line of sight between the remote control and receiving units of the machine.

Power failure of remote control and/or machine.
3.15 Behavior in dangerous situations
Preventive measures:

Always be prepared for accidents.

Keep first aid equipment on hand.

Make sure that all employees are familiar with accident reporting, first aid, and rescue facilities.

Keep access routes clear for emergency vehicles.

Make sure that employees receive first aid training.
Measures in the case of an emergency:

Immediately take the machine out of operation.

Remove injured and other people from the danger zone.

Initiate first aid measures.

Alert rescuers.

Keep access routes clear for emergency vehicles.

Inform managers at the site.
Item Description Item Description
1 Protective hood 3 Emergency shutdown switch
2 Automatic central position of control handle
NOTE
Always tighten loose screw connections using the specified torque setting.