manualshive.com logo in svg

Wacker Neuson DPU 100, Operator'S Manual

Share
Download
Wacker Neuson DPU 100 Operator'S Manual Download Page 21

6 Components and operator's controls

21

100_0202_cp_0006.fm

Display and control lamps

Control lamp for operation

The control lamp for operation indicates whether the machine has been activated via the ON/OFF switch.

The control lamp for operation lights up green when the machine has been activated via the ON/OFF 
switch.

The control lamp for operation goes out when the machine has been deactivated via the ON/OFF 
switch.

Control lamp for charging

The control lamp for charging indicates whether the starter battery of the machine is being charged.

The control lamp for charging lights up red when the machine is activated.

The control lamp for charging goes out when the engine is running.

The control lamp for charging lights up red when the starter battery of the machine is no longer 
charged.

Control lamp for preheating

When the engine is started, the control lamp for preheating indicates whether the glow plugs are being 
preheated.

The control lamp for preheating lights up yellow as long as the glow plugs of the engine are preheated 
during starting. 

The control lamp for preheating goes out when preheating is completed.

Control lamp for air cleaner

The control lamp for the air cleaner displays the maintenance condition of the air cleaner.

The control lamp for the air cleaner lights up yellow when the air cleaner is dirty.

Control lamp for oil pressure

The oil-pressure control lamp indicates whether the oil pressure is sufficient.

The control lamp for oil pressure lights up red when the machine is activated.

The control lamp for oil pressure goes out when the engine is running.

The control lamp for oil pressure lights up red when the oil pressure is too low.

Control lamp for coolant temperature

The control lamp for coolant temperature indicates whether the coolant temperature is within the 
permissible range.

The control lamp for coolant temperature lights up red when the coolant temperature is too high.

Item

Designation

Item

Designation

1

Control lamp for operation

5

Control lamp for oil pressure

2

Control lamp for charging

6

Control lamp for coolant temperature

3

Control lamp for preheating

7

Display

4

Control lamp for air cleaner

1   2   3  4   5  6

7

Summary of Contents for DPU 100









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands